Publicidad
Idiomas disponibles
Idiomas disponibles
Auto Mode
In order to select Color change and Color fade, set dipswitch 9 and 10 to OFF. Set dipswitches 1 – 6 to
OFF as well.
Speed can be adjusted via dipswitches 7 and 8.
In order to select Static colors and flash, set dipswitch 9 and 10 to OFF. Set dipswitches 7 and 8 to OFF as
well.
Dipswitch 1 to 3 control the color settings.
Dipswitch 4 to 6 control the flash settings.
Sound Control
In order to select Sound controlled color change, set dipswitch 9 to ON and dipswitch 10 to OFF.
DMX-CONTROLLED OPERATION
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Addressing the Projector
Set the dipswitches 1 and 10 to ON. (This setting is also used to determine the Slave device).
Controlling:
After having addressed all LED PAR-64 RGB Spots, you may now start operating these via your lighting
controller.
DMX-protocol
Channel 1
Red
0 - 255
0-100 %
Channel 2
Green
0 - 255
0-100 %
Channel 3
Blue
0 - 255
0-100 %
Channel 4
Dimmer
0 – 255
0-100 %
Channel 5
Flash
0 - 10
No function
11 - 255
0-100 % with increasing speed
Blackout
In order to select Blackout, set dipswitch 10 to ON and dipswitch 1 to 9 to OFF.
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
19/38
51913634_V_1_0.DOC
Publicidad
