Publicidad
Idiomas disponibles
Idiomas disponibles
Operating this unit
Disc loading slot
# To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
2
Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
# You can eject a CD (CD-ROM) by pressing
EJECT.
3
Close the front panel.
4
Push MULTI-CONTROL up or down to
select a folder when playing a compressed
audio.
# You cannot select a folder that does not have
a compressed audio file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
5
To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
# If you select Rough search, pushing and hold-
ing MULTI-CONTROL left or right enables you to
search every 10 tracks in the current disc (folder).
(Refer to Searching every 10 tracks in the current
disc or folder on page 15.)
6
To skip back or forward to another
track, push MULTI-CONTROL left or right.
! There is sometimes a delay between starting
! If an error message such as ERROR-11 is dis-
! When playing CD-EXTRA or MIXED-MODE
EJECT button
! If you have switched between compressed
! When playing back VBR (variable bit rate) re-
! When playing compressed audio, there is no
! Playback is carried out in order of file number.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
! When audio files are being played back,
1
Track number input display appears.
2
track number.
# You can cancel the input number by pressing
CLEAR.
3
The track of entered number will play.
# After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
Notes
up disc playback and the sound being issued.
When being read, Format read is displayed.
played, refer to Understanding error messages
on page 51.
CDs, compressed audio and CD-DA can be
switched by pressing BAND.
audio and CD-DA, playback starts at the first
track on the disc.
corded files, elapsed play time may not be dis-
played correctly.
sound on fast forward or reverse.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
you can select track in the current folder.
Press DIRECT.
Press 0 to 9 buttons to enter the desired
Press DIRECT.
Section
02
13
En
Publicidad
