Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
CASSETTE RECORDER
5. Press RECORD 0 to start recording.
– Playing of the CD program starts automatically from the
beginning of the program. It is not necessary to start the CD
player separately.
To select and record a particular passage within a track:
• Press and hold down on SEARCH ∞ or § (on the remote
control 5 or 6).
• When you recognize the passage you want, release SEARCH
∞ or §.
• To interrupt CD playback press PLAY•PAUSE 2; (on the
remote control 2;).
• Recording will begin from this exact point in the track when
you press RECORD 0.
6. For brief interruptions during recording, press PAUSE ;. To
resume recording, press PAUSE ; again.
7. To stop recording, press OPEN•STOP / 9.
Recording from the tuner
1. Tune to the desired radio station (see Tuning to radio stations).
2. Press OPEN•STOP / 9 to open the cassette door.
3. Insert a suitable tape into the cassette deck and close the
cassette door.
4. Press RECORD 0 to start recording.
5. For brief interruptions, press PAUSE ; To resume recording,
press PAUSE ; again.
6. To stop recording, press OPEN•STOP / 9.
Tape deck maintenance
To ensure quality recording and playback of the tape deck, clean
parts A, B and C shown in the diagram below, after approx.
50 hours of operation, or on average once a month. Use a cotton
bud slightly moistened with alcohol or a special head cleaning
fluid to clean both decks.
1. Open the cassette compartment by pressing OPEN•STOP /
9.
2. Press PLAY 1 and clean the rubber pressure rollers C.
3. Press PAUSE ; and clean the magnetic heads A and also the
capstan B.
4. After cleaning, press OPEN•STOP / 9.
Note:
Cleaning of the heads can also be done by playing a cleaning
cassette through once.
16
C
B
A
A
Publicidad
