Publicidad
Idiomas disponibles
Idiomas disponibles
Insignia NS-20WLCD 20" LCD TV
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
3 Replace the cover.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the batteries leak,
clean the battery compartment with a cloth. If chemicals
touch your skin, wash immediately.
• The batteries that came with your TV may have a shorter
life than new batteries.
• If the remote control is not going to be used for an extended
period of time, remove the batteries.
Connecting your TV to an electrical outlet
To connect your TV to an electrical outlet:
•
Plug the power cord into an electrical
outlet.
Notes
• Make sure that you use the correct type of power. See the
label on your TV.
• If you do not intend to use your TV for an extended period of
time, unplug the power cord from the electrical outlet.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
If your antenna cable has a 75 ohm connector,
connect the cable to the RF jack on the back of
your TV.
www.insignia-products.com
75 ohm cable
300-ohm cable
7
Publicidad
