Publicidad
Idiomas disponibles
Idiomas disponibles
Insignia NS-20WLCD 20" LCD TV
5 Press the CH+ or CH– one or more times to
select Channel Skip.
6 Press the ENTER, VOL+, or VOL– button to
select On or Off.
If you select On, the channel is erased from
the list.
If you select Off, the channel is added to the
list.
When you erase a channel, you cannot tune
to the channel with the CH+ or CH– buttons.
You can tune to the channel by pressing the
numbers buttons for the channel.
Fine tuning the TV signal
Automatically fine-tuning
To automatically fine-tune the TV signal:
1 Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button to select
Channel.
3 Press the ENTER, VOL+, or VOL– button to
open the Channel menu.
4 Press the CH+ or CH– button one or more
times to select AFC.
5 Press the ENTER, VOL+, or VOL– button to
turn the AFC option on or off. When the AFC
option is turned on, your TV automatically
fine-tunes for the best picture and sound.
Manually fine-tuning
To manually fine-tune the TV signal:
1 Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button to select
Channel.
3 Press the ENTER, VOL+, or VOL– button to
open the Channel menu.
4 Press the CH+ or CH– button one or more
times to select Fine Tune.
5 Press the VOL+ or VOL– button one or more
times to adjust the picture and sound.
Note
If you manually fine-tune a program, the AFC option turns off.
Changing channels
To change the channels:
•
Press the CH+ or CH– button one or more
times to select the channel you want.
•
To select a one-digit channel number,
press the number button for the channel,
then press the ENTER button or wait a
few seconds.
•
To select a two-digit channel number,
press the two number buttons in
sequence, then press the ENTER button
or wait a few seconds.
•
To select a three-digit channel number,
press the three number buttons in
sequence.
Note
To watch a channel that has been erased from the channel list,
you must use the number buttons to tune the channel.
Adjusting the volume
To adjust the volume:
•
Press the VOL+ or VOL– button to
increase or decrease the volume.
•
Press the MUTE
Press the button again to restore sound.
Selecting a menu language
To select a menu language:
1 Press the MENU button to open the OSD.
2 Press the CH+ or CH– button one or more
times to select Display.
www.insignia-products.com
button to mute sound.
11
Publicidad
