Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3
Securing the fixture base
Carefully tuck all the wires and wire
connections into the outlet box.
Place the fixture pan (A) over the outlet
box and feed the anchor screws (DD)
through the keyhole slots.
Drill a 1/4 in. (6.4 mm) hole at the narrow
end of each keyhole slot marking on the
ceiling.
Slide the fixture pan (A) so that the
anchor screws (DD) slide into the narrow
ends of the keyhole slots.
Tighten the anchor screws (DD) so that
the fixture pan (A) is secured flush
against the ceiling.
4
Assembling the fixture
Place the acrylic shade (B) onto the
fixture pan (A).
Place the shade frame (C) onto the fixture
pan (A).
Secure the shade frame (C) onto the
fixture pan (A) using the thumb nuts (AA).
All manuals and user guides at all-guides.com
DD
A
A
AA
6
CC
A
DD
B
C
Publicidad
