Publicidad
Idiomas disponibles
Idiomas disponibles
5
Using your cooler/freezer
The
operating
regulated by the temperature control.
Warm
1
2
(Or) Min.
0=System cooling is off.
1=Lowest cooling setting (Warmest
setting).
5=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according to
the desired temperature.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
Frequently opening the door causes
the interior temperature to rise.
Figures in this user manual are schematic and may not match the product
C
exactly. If the subject parts are not included in the product you have
purchased, then those parts are valid for other models.
Refrigerator/User Manual
temperature
Cold
3
4
5
Max.
For this reason, it is recommended to
close the door again as soon as possible
after use.
The interior temperature of your
refrigerator changes for the following
reasons;
• Seasonal temperatures,
• Frequent opening of the door and
leaving the door open for long periods,
• Food put into the refrigerator without
cooling down to the room temperature,
• The location of the refrigerator in the
room (e.g. exposing to sunlight).
is
• You may adjust the varying interior
temperature due to such reasons by
using the thermostat. Numbers around
the thermostat button indicates the
cooling degrees.
• If the ambient temperature is higher
than 32°C, turn the thermostat button
to maximum position.
• If the ambient temperature is lower
than 25°C, turn the thermostat button
to minimum position.
13 / 22 EN
Publicidad
