Kohler K-45906 Guía De Instalación Y Cuidado página 2

Tools and Materials
Phillips
Screwdriver
Before You Begin
NOTE: This guide includes the installation sequence for the shower
column only. Install the mixing valve, mixing valve trim, and spout
according to the manufacturer's instructions.
NOTICE: Risk of product damage. Do not apply excessive weight
or downward force to the shower column.
CAUTION: Risk of property damage. Water leakage may
occur if supply piping allows movement. Ensure the supply
piping and 1/2"-14 NPT elbow fitting are securely fastened to
braces in the stud framing.
NOTE: The showerhead and handshower are purchased separately.
Please read all instructions before you begin.
Observe all local plumbing and building codes.
Shut off the water supply.
Inspect the existing supply piping and wall materials. Replace if
necessary.
The shower column is supplied with toggle anchor fasteners for
installation onto a finished wall surface. The finished wall
thickness must be a minimum of 5/8" (16 mm) and must be
adequate in strength. Two toggle anchor fasteners are required
per mounting collar.
1189046-2-A
3/8"
Sealant Tape
100% Silicone Sealant
2
1/2"
Kohler Co.