Publicidad
Idiomas disponibles
Idiomas disponibles
1.
INFORMATION FOR USERS
intended use
The use of the appliance treated in this document must be considered "Proper Use" if used for cooking or regeneration
of goods intended for alimentary use; any other use is to be considered "Improper use" and therefore dangerous. The
appliance must be used according to the foreseen conditions stated in the contract within the prescribed capacity limits
carried in the respective paragraphs.
Allowed operating conditions
The appliance has been designed to operate only inside of rooms within the prescribed technical and capacity limits.
The following indications must be observed in order to attain ideal operation and safe work conditions.
The appliance must be installed in a suitable place, namely, one which allows normal running, routine and extraordinary
maintenance operations. The operating area for maintenance must be set up in such a way that the safety of the
operator is not endangered.
The room must also be provided with the features required for installation, such as:
•
room temperature > + 5°C;
•
maximum relative humidity: 80%;
•
minimum cooling water temperature > + 10 °C ;
•
the floor must be anti-slip, and devices positioned perfectly level;
•
the room must be equipped with a ventilation system and lighting as prescribed by standards in force in the country
of the user;
•
the room must be set up for draining greywater, and must have switches and gate valves which cut all types of
supply upstream the appliance when needed;
•
The walls around the appliance must be fireproof and/or insulated against possible heat sources.
Test inspection and warranty
Test inspection: the appliance was inspected by the manufacturer during assembly at the production site. All inspection
certificates will be delivered to the customer.
Warranty: the appliance is covered by a 12-month warranty, according to the details carried on the sales contract. If
during the period covered by the warranty, defective operations occur or faulty equipment parts are found which are
included in the warranty conditions, after proper verifications, the faulty parts will be repaired or replaced.
The faulty parts covered by the warranty will be repaired or replaced free of charge. The customer will take care of
transportation and/or shipping expenses, as well as 2-way trip expenses relative to the interventions of the manufacturer's
technicians at the customer's site.
Labour costs relative to the intervention of the manufacturer's technicians at the customer's site for repairing defects
covered by the warranty are at the customer's expenses, unless the nature of the defect can easily be taken care of by
the customer.
All expendable equipment and materials supplied by the manufacturer together with the unit are excluded from the
warranty.
The Manufacturer is liable for the equipment in its original configuration.
The manufacturer will not be held liable for improper use of the appliance, for damage caused ensuing operations not
taken into consideration in this manual or without prior authorisation of the manufacturer himself.
The warranty terminates in case of:
• Damage caused by transportation and/or handling. Should this occur, the customer must inform the dealer and carrier
via fax or RR and must write what has happened on the copies of the transportation documents. The specialised
technician installing the appliance will assess whether it can be installed depending on the damage.
The warranty also terminates in the presence of:
• Damage caused by incorrect installation.
• Damage caused by parts worn due to improper use.
• Damage caused by use of unadvised or non-original spare parts.
• Damage caused by incorrect maintenance and/or lack of maintenance.
• Damage caused by failure to comply with the procedures described in this document.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
All manuals and user guides at all-guides.com
- 4 -
4
Publicidad
