Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING LEGS
1.
Place the wheels on the brackets and click them together.
2.
Place the brackets with wheels on the ends of the bottom of the unit and screw.
MANUAL
•
Connect the device to the network.
•
Turn the thermostat control knob in the direction of clockwise into position maximum .
•
Turn the power selector to the desired position. The indicator light will illuminate.
–
Position "I": Minimum power.
–
Position "II": Maximum power.
–
Position "0": Off.
BP1007
•
When the room temperature is the desired one, turn the thermostat control counter clockwise
to clockwise until the indicator light turns off. Leave the command in that position, and
the thermostat will automatically maintain the selected temperature, initiating a series of
connections and disconnections.
•
When not using the unit, turn the power switch to "0 "(OFF) and disconnect the network device.
MAINTENANCE AND CLEANING
•
Before cleaning, make sure the appliance is disconnected from the network and completely
cold.
•
It is important to keep the grille clean. Remove any lint, dust or strange elements that hinder a
correct air evacuation
•
Use a dry cloth for cleaning.
•
Do not use chemical or abrasive cleaners, steel scourers, etc, which can damage the device's
surfaces.
POWERS
POSICIÓN "0"
POSICIÓN "I"
OFF
1000 W
POSICIÓN "II"
2000 W
EN
9
Publicidad
