Grundig 01M-GHF1040-4320-03 Manual Del Usuario página 27

TUNER­MODE
Automatic­station­search­for­FM­
radio­stations
1
Switch on the hi-fi system by pressing »
2­Select TUNER with »SOURCE« on the re-
mote control or »
3
For the automatic station search press and
hold »MEMORY­PROG« on the remote
control for 2 seconds. .
– Display: »AUTOSCAN«.
– The device searches for up to 40 stations
with strong reception and stores them auto-
matically. After the search has finished, you
will hear the station stored at preset 01.
Notes:
You can cancel the automatic station search
7
by pressing » «.
7
You can restart the automatic station search
7
by pressing »MEMORY
frequency display changes to rapid run-
through.
Setting­and­storing­radio­stations­
manually
1 Set the radio station by briefly pressing
»TUN –­1 0 – « or »TUN+­10+« repeatedly.
– Display: the frequency changes in steps of
50 kHz;
or
press and hold down
»TUN+­10+« until the frequency changes to
rapid run-through.
2
Save a radio station as a preset by pressing
PROG«, selecting the preset
»MEMORY
­
with » « or »
3
press »PROG« to save.
3 To search and save more radio stations, re-
peat steps 1 to 2.
Selecting­presets
1
Select a preset by pressing »
on the appliance or »
remote control.
­ - -----------------------------------------------------------------------------------------------------------------------
8 «.
« on the appliance.
PROG« until the
»TUN –­1 0 –
« or
« and then
4
« or » «
« or » « on the
27­
ENGLISH