cecotec TASTY&GRILL 2000 INOX Manual De Instrucciones página 16

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Left handle
2. Plate
3. Right handle
4. Temperature knob
5. Light indicator
6. Main body
7. Fat-drip tray
8. Spatula
Fig. 2.
1. Maximum temperature
2. Minimum temperature
2. BEFORE USE
This product has been packaged to protect it against transportation damage. Unpack the
appliance and keep the original packaging carton and materials in a safe place. It will help
prevent any damage if the product needs to be transported in the future. In case the original
packaging is disposed of, make sure all packaging materials are recycled accordingly.
Make sure all parts and accessories are present and in good conditions. If not, contact
immediately the Technical Support Service of Cecotec.
Clean thoroughly all the product's parts that come into contact with ingredients with a wet
sponge or cloth before operating it for the first time.
Dry it with a cloth or paper towel.• For best results, lightly coat the cooking plate with a bit of
cooking oil or cooking spray.
Note: You may notice a slight burning smell or smoke when using the grill for the first time,
caused by the excess of lubricants from the manufacturing process. This does not affect the
safety of your appliance.
3. OPERATION
Note: Do not drop or impact the temperature knob against hard surfaces, as it may cause
damage and affect proper temperature control. Stop using the temperature control if it is
damaged or it overheats.
30 TASTY&GRILL 2000 INOX / INOX STONE / INOX MIXSTONE / INOX LINESTONE
Make sure that the temperature knob is at the off position and plug the device to a power
supply.
Select the desired temperature with the temperature control knob; it will take a few minutes to
reach the temperature. The light indicator will turn on.
When the light indicator turns off, the device has reached the desired temperature and is ready
to cook.
While in use, the light indicator will turn off and on. This indicates that the thermostat is
working to reach the desired temperature, or that the temperature has been reached and,
therefore, the thermostat stops working.
Cooking time will vary depending on the type of food to be cooked.
When food is ready, turn off the appliance and remove the food with a wooden or silicone
spatula.
After using the device, unplug it from the power supply and wait until it cools down before
cleaning and storing it.
Note: To prevent damage, the unit will automatically turn off when the fat-drip tray is not
assembled in place.
4. CLEANING AND MAINTENANCE
Unplug the device and remove the power cord.
Allow the device to cool completely down before cleaning it.
Clean the griddle with warm soapy water and a sponge or soft cloth.
Rinse thoroughly.
Do not use abrasive cleaners or scouring pads.
Do not put temperature control or power cord in the dishwasher.
Never immerse the power cord, plug or temperature selector in any liquid.
Do not soak the device in water overnight.
The griddle and the fat-drip tray are both dishwasher safe.
5. TECHNICAL SPECIFICATIONS
03093 Tasty&Grill 2000 Inox
03094 Tasty&Grill 2000 Inox Stone
03095 Tasty&Grill 2000 Inox MixStone
03096 Tasty&Grill 2000 Inox LineStone
2000 W, 220-240 V, 50/60 Hz
Made in China | Designed in Spain
TASTY&GRILL 2000 INOX / INOX STONE / INOX MIXSTONE / INOX LINESTONE
ENGLISH
31