Publicidad
Clamp
lever
Axis
lock
4
/
" grinding
1
2
wheel included
Outer
flange
Inner
flange
Auxiliary handle
assembling orifice
Clamp
lever
Protection Guard Assembly
1. Open the clamp lever and match both cantilevered parts inside the protection guard
bracket with the matching slots in the axis cover. Push the protective guard down until the
protruding parts engage and rotate freely with the corresponding grooves in the axis cover.
2. With the clamp lever open, turn the protective guard to the desired working position.
3. Set it pushing the bracket lever.
Protective
Guard
1
Disc Assembly
4. Fit the inner flange onto the spindle.
5. Set the disc onto the inner flange.
6. Set the outer flange onto the spindle.
7. Press the spindle lock into the grinder head.
8. Screw the outer flange with the lock nut wrench until securely fastened.
DANGER
The spindle lock should only be used to change discs.
Never use it to stop the disc while rotating.
Parts
Protective
guard
Auxiliary
handle
4
/
1
2
ABT-386
Switch
Preparation
2
Slot
Switch
" grinding wheel
included
Protective
guard
3
5/8-11
UNC-1A
Lock nut wrench
Handle
Vent
Power cord
slots
protector
5
7
ENGLISH
(Included)
Axis
lock
Protective
guard
Power
supply cable
8
6
4
7
Publicidad
