Publicidad
1
2
1
3
6
³⁄₁₆"
2
min. 1⁵⁄₁₆"
max. 1⁹⁄₁₆"
English
Rough in
Install ½" NPT female fittings, recessed ³⁄₁₆" behind
the surface of the finished wall, for the hot and cold
water supplies.
The fittings should be 5⅞" apart on center.
For proper operation of the thermo-
static mixer, the hot supply must be
on the left and the cold supply must
be on the right.
Install the finished wall. Make sure that the wall is
watertight.
Installation
Wrap the inlet threads on the s-unions with teflon
tape.
Screw the s-unions into the female fittings.
The s-unions should be 5⅞" apart on center and
should extend 1⁵⁄₁₆"-1⁹⁄₁₆" outside the surface of the
finished wall.
Publicidad
