Tilt Protection; The Ideal Location; Before Using The Appliance The First Time - Unold 86410 Instrucciones De Uso

the appliance is very hot during and after operation - danger of burn injuries!
Do not use timers or other external switch-on / switch-off systems to operate the appliance.
use of such items could unintentionally reset the overheating protection circuit and cause
a fire hazard.
to prevent overheating and the associated fire hazard, never cover the appliance during
operation.
Do not operate the appliance in the vicinity of sinks, bathtubs or other containers filled
with water.
the manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

TiLT proTecTion

THe iDeaL LocaTion

1. Maintain an adequate safety distance (at
least 1 meter) to other objects, such as fur-
niture, curtains, etc.
2. Only place the appliance in operation in a
vertical position.
3. Ensure that air can flow in and out unhinde-
red - do not, under any circumstances, cover
the air inlets of the appliance.
4. Only place the appliance on a solid and level
substrate. Do not place the appliance on
soft surfaces (sofa, bed) because the appli-
ance can tip over.
5. In addition, ensure that the appliance is not
set up on deep-pile carpets or in dusty envi-
ronments.

beFore uSing THe appLiance THe FirST Time

1. Remove all packaging materials and any
transport safeguards.
2. Comply with all instructions that are spe-
cified in the chapter, "The ideal location"
and "For your safety", and find a suitable
location.
16
When you lightly shake
the appliance you will
hear a noise coming from
the interior of the appli-
ance. This is caused by
the tilt protection technology used; there is no
defect in the appliance!
The tilt protection switches the appliance off
immediately, as soon as the appliance tilts to
a position where safe operation is in jeopardy.
6. Never place the appliance directly under an
electrical outlet, and ensure that the power
socket used is easily accessible at all times.
7. Check whether the power cord is routed in
such a manner that no one can stumble over
it.
8. The power cord should not touch any
housing parts, this could cause the cable
to melt.
Be aware that the appliance can be-
come very hot - fire hazard! Particular-
ly ensure that children are kept away
from the appliance.
3. When you use the appliance for the first
time, or if it has not been operated for an
extended period of time, a slight odour can
occur.