Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTION
TO INSTALL THE BATTERY PACK (See Figure 7)
• Lift and hold up the battery door (1).
• Align the battery (2) with the mower's battery port.
• Insert the battery into the left battery compartment to start the mower. This mower is equipped
with a battery storage compartment which offers a convenient place for storing your battery
when not in use, or to store an extra battery pack to extend your run-time.
• Make sure the battery release button (4) snaps in place and that battery is fully seated and
secure in the mower before beginning operation.
• Insert the safety key (3). If the machine is not going to be used immediately, do not insert the
safety key.
• Close the door.
(4)
TO REMOVE THE BATTERY PACK (See Figure 7)
• Release the bail lever to stop the mower.
• Open the battery door.
• Remove the safety key.
• Press the battery release button (4). This will cause the battery to raise out of the tool slightly.
• Remove the battery from the mower.
(3)
(2)
(1)
17
(2)
Fig. 7
Publicidad
