Operating - Medisana MC 812 Instrucciones De Manejo

GB

3 Operating

3.1
The use of the Shiatsu massage seat cover will improve your wellbeing
Usage after a stressful day. The massage effect is particularly useful for treating
tense muscles and tired tissue. The unit provides pleasant relaxation for
overcoming everyday stress. The massaging can improve your well-
being, and is also useful in the sport and fitness areas.
3.2 Start-up
Operation
• This massage seat cover can be fixed on an office chair or any
suitable seating with a backrest (e.g. chair, sofa or similar).
• Insert plug into the mains socket. Ensure that the power supply is
easily accessible.
• Take a seat on the Shiatsu massage seat cover and familiarise your-
self with the functions.
Operating the unit
The MC 812 shiatsu massage seat cover can be switched on by
pressing the On / Off button
above the On / Off button
automatically moved to home position. During this process, no function
key works. After the homing function, the LED will stop flashing and the
device is ready to use. During the homing function, do not press any
function key until the LED above the On / Off button
constantly to indicate the device is ready to use.
Use the buttons on the cable remote control
massage seat cover:
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
16
3
When the "Upper Back" massage button ("A")
next to the button illuminates and the Shiatsu massage heads move
from the home position up to the upper back area, massaging the back
in a circular motion whilst doing so. If you press the button during the
massage again, this function is switched off.
If you press the "Lower Back" massage button ("B")
to the button illuminates and the Shiatsu massage heads move from
the home position to the lower back area, massaging the lower back in a
circular motion whilst doing so. If you press the button during the
massage again, this function is switched off.
If you press the "A+B" massage button
similar to pressing buttons
back.
You can enhance the shiatsu massage at any time with a vibration
massage by pressing the vibration massage button
The heat function can be activated at any time with the shiatsu mas-
sage, just press the button for infrared heat
the respective LED lights up. Press the button again to deactivate the
heat function.
After each use, switch the device off using the On/Off button
remove the plug from the mains socket.
3
. After pressing the button, the LED
will flash and the massage heads will be
2
to operate the
5
is pressed, the LED
4
the function procedure is
6
5
and , except that it is for the entire
8
to activate the function;
i
3
lights up
6
, the LED next
7
.
3
and