Publicidad
Idiomas disponibles
Idiomas disponibles
7. Install the AC Multi-Output Supply
AC Gang
Supply
IMPORTANT! Follow the correct power system installation based on your model.
For a single AC supply power unit installation, refer to Install the "AC Single
Supply."
IMPORTANT! Installation must not exceed two soap dispensers and two faucets on a
multi-outlet supply.
Mount the AC supply under the deck using the two screws provided. Orient as
shown.
Remove the cover.
Connect the faucet wire to the faucet. Maintain a drip loop when connecting.
If needed, cut and strip the AC supply wires to length.
Connect the stripped ends to the bottom terminal block in the supply box.
Secure the terminal box cover to the terminal box.
NOTE: AC supply cables are available in lengths of 4' (1.2 m), 6' (1.8 m), 8' (2.4 m), 10'
(3 m) and 12' (3.6 m).
Connect the power cord from the control box to the power cord from the Multi-
outlet AC Power Supply SKU 13481-NA. Maintain a drip loop when connecting.
1419480-2-A
Black
Red
12
AC Supply
Cable
Kohler Co.
Publicidad
