Volpi KV310 Manual Del Usuario página 40

The buyer must also keep a copy of the sales document (receipt, invoice) and of the warranty
registration: a copy of these documents must be given to the Dealer or Authorized Customer Service
together with the machine to be repaired. In the absence of these documents, the machine will in any
case be considered out of warranty.
21. Troubleshooting and repair
Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
Problem
Pruner doesn't start
Intermittent Operation
Hot Blades
Poor Trimming
Performance
40
Possible Reason
Battery out of charge
Battery not connected
Safety switch cannot be
initiated
On / off switch failure
Loose internal connections
On / off switch failure
Blade dull
Blade gap
Poor lubrication, resulting in
excessive friction
Lubrication is not in place,
resulting in excessive friction
Dirty blade
Blade dull
Trimming quality is poor
The battery is not fully
charged
Corrective Action
Charge Battery
Connect battery
Open by initiating safety on
switch
Send to repair service center
Send to repair service center
Sharpen or replace the blade
Sharpen or replace the blade
Lubricate blade
Lubricate blade
Clean blade
Sharpen or replace the blade
Read the instructions carefully
Charge the battery