Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up your French Door Refrigerator
CONNECTING THE WATER SUPPLY LINE TO THE REFRIGERATOR
Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
Use Copper Tubing
•
¼" copper tubing
•
¼" compression nut (1pc)
•
Ferrule (2pc)
1. Connect the household water line to the assembled compression fitting.
- If you are using copper tubing, slip the compression nut
copper tubing (not supplied) as shown.
- If you are using plastic tubing , insert the molded end (Bulb) of the plastic tubing into the compression fitting.
Do not use without the molded end (Bulb) of the plastic tubing .
CAUTION
2. Tighten the compression nut
3. Turn the water on and check for any leakage. If you see water drops or leakage in the connection areas,
turn off the main water supply. Check the connections, and tighten more if necessary.
4. Let the ice maker make ice for 1 to 2 days. Over that period of time, throw out the first 1 or 2 buckets of
ice the ice maker makes to ensure all impurities have been removed from the water line.
5. Check again for leaks. If you see water drops or leakage in the connection area, turn off the main water
supply. Check the connections, and tighten more if necessary.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug,
leak-free connection.
DA68-01926A-10.indb 19
Use Plastic Tubing
•
¼" plastic tubing
→
Molded end(Bulb)
•
¼" compression nut (1pc)
onto the compression fitting. Do not over-tighten the compression nut .
Refrigerator
Compression
Nut (1/4")
(Assembled)
Ferrule
(Not supplied)
Copper tubing
Plastic tubing
or
(Not supplied)
(Not supplied)
Household water supply line
(not supplied) and ferrule (not supplied) on
Plastic Tubing
(Assembled)
Compression Fitting
(Assembled)
Molded end(Bulb)
Compression nut
(1/4") (Not supplied)
Setting Up _19
13. 4. 24.
11:38
Publicidad
