Publicidad
Idiomas disponibles
Idiomas disponibles
Operating your French Door Refrigerator
Fridge Button
Press the Fridge button (
Whenever you press the button, the temperature will move 2°F degrees with each push. You can set the
temperature between 46°F and 34°F.
38°F is recommended.
The temperature of the freezer and fridge may rise if you open the doors too frequently or if you
place a large amount of warm or hot food inside. This may cause the digital display to blink. Once
the freezer and refrigerator temperature return to their normal set temperatures, the blinking stops.
If the blinking continues, you may need to "reset" the refrigerator. Try unplugging the appliance,
waiting for around 10 minutes, and then plugging the power cord back in.
E.Saver Button
Press the E.Saver Button (
blue.
If condensation occurs on the doors, wipe up the water drops and
turn the E.Saving function off.
Cooling Off Mode
This function is for store display refrigerators. It is not for customer use.
In Coolong Off Mode, the refrigerator's lights go on, but doesn't make cool air. To cancel this
mode, press the Power Freeze and Freezer buttons at the same time for 3 seconds until you hear
CAUTION
a "Ding-Dong" sound. The unit will now cool.
DA68-01926A-10.indb 23
) repeatedly until the desired temperature is shown in the display (
4
) for better energy efficiency. If E. Saver mode is ON, the button will light up
6
).
B
Operating _23
13. 4. 24.
11:38
Publicidad
