Control
Kit
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Steam
Head
K-1569/K-1669
21" (53.3 cm)
Steam
Head
6"
(15.2 cm)
21" (53.3 cm)
Steam
Head
6"
(15.2 cm)
2. Determine the Location of the Steam Hardware
WARNING: Risk of personal injury. Do not install the Steam Control User Interface outside the
steam enclosure. The User Interface must be installed within the enclosure to allow the sensors to
regulate the temperature and control the flow of steam. Refer to the Installation Guide for the
Steam Control Kit.
WARNING: Risk of scalding. Do not block the steam head or locate it near a seat or bench, as the
steam head is hot during operation and may scald the user if touched.
Modules; Steam Head and Control Location
NOTE: All dimensions should be taken from the inside of the shower.
IMPORTANT! Do not install the control directly above or in-line with the steam head.
Review the layout options as an aid to determine the location for the components of the steam
system.
Kohler Co.
12" (30.5 cm)
Steam
6" (15.2 cm)
Head
Control
Kit
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Drain End
K-1683/K-1684
Control
Kit
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Drain End
K-9486/K-9489
21"
(53.3 cm)
Control
Kit
11"
(27.9 cm)
60"
(152.4 cm)
6"
Steam
(15.2 cm)
Head
K-1687
4-1/2"
(11.4 cm)
Steam
Head
60"
(152.4 cm)
Drain End
K-1681/K-1682
4-1/2"
(11.4 cm)
Steam
60"
Head
(152.4 cm)
Drain End
K-9488/K-9496
5
Control
Kit
11"
(27.9 cm)
60"
(152.4 cm)
6"
Steam
(15.2 cm)
Head
K-1688
Control
21" (53.3 cm)
Kit
Steam
Head
6"
(15.2 cm)
Control
21" (53.3 cm)
Kit
Steam
Head
6"
(15.2 cm)
1060226-2-G
21"
(53.3 cm)
Steam
Head