Toyotomi Zibro RS 30 Instrucciones De Uso página 18

6 Store the heater in a dust-free place, if possible in its original packaging.
Unused fuel cannot be used for the next heating season. If there is still some
fuel left, do not throw it away, but dispose of it in accordance with the local
regulations for the disposal of domestic chemical waste. Always start the new
heating season with fresh fuel. When you start re-using the heater, follow the
instructions again (starting from Section A and as specified).
I
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1 Let the heater cool down.
2 Remove the removable tank
(Fig. P). Some drops may leak from the fuel filter; keep a cloth at hand. Store
the fuel filter and the removable tank outside the heater.
3 Place the transportation cap into the position of the fuel filter (Fig. Q). Press it
tight.
4 Always move the heater in an upright position.
J
SPECIFICATIONS
Ignition
Fuel
Capacity (kW) *
) **
Suitable space (m 3
Fuel consumption (l/hr) *
Fuel consumption (g/hr) *
Burning time per tank (hr) *
Capacity removable tank (litres) 4.0
* At maximum setting
** Specified values are indicative
4
10
from the heater and remove the fuel filter
electrical Dimensions (mm)
paraffin (including base plate) depth
3.00
60-110 Accessories:
0.313 Required batteries
250
12.8 Wick type
Weight (kg)
fuel filter
width 428
295
height 453
transportation cap
manual fuel pump
4x LR14, MIN 1400
1.5V, size C
F
8.0
P
Q
Transportation cap