Publicidad
Idiomas disponibles
Idiomas disponibles
Cautions
• It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
• If airbags or any other shock-absorbing
equipment are in your car, contact the store where
you purchased this unit or the car dealer before
installation.
Notes
• When mounting on the dashboard, remove the visor clip
carefully from the microphone , then attach the flat-
mount base to the microphone .
• Before attaching the double-sided tape , clean the
surface of the dashboard with a dry cloth.
Using the steering wheel remote
control
When using the steering wheel remote
control
Installation of the connection cable RC-SR1 is
required before use.
1
To enable the steering wheel remote
control, select [General] [Steering Control]
[Custom]
to make the registration.
When the registration is complete, the steering
wheel remote control becomes available.
Notes on installing the connection cable
RC-SR1
REMOTE IN
Black
Green
Brown
• Before installing, turn on the car ignition then
check that the steering wheel control buttons are
working correctly.
• Refer to the support site for details then connect
each lead properly to the appropriate leads.
Making an improper connection may damage the
unit.
– Customers in Latin America:
https://www.sony.com/am/support
– Customers in Asia Pacific and Middle East:
https://www.sony-asia.com/support
• Consulting the dealer or an experienced
technician for help is recommended.
GND
Input 1
Input 2
When using an adaptor for the steering wheel
remote control
Depending on the type of car, use an adaptor for
the steering wheel remote control (not supplied).
1
Set [Steering Control] in [General] to
[Preset].
The adaptor for the steering wheel remote
control is enabled.
Using an A/V device
Installation of a mini-jack A/V cable (not supplied)
is required before use.
1
Connect the installed mini-jack A/V cable to
the Video Output terminal of the A/V
device.
Do not connect to the Video Input terminal of
the A/V device.
2
Press HOME, then touch [A/V IN].
CAUTION
Be sure to use a mini-jack A/V cable (not supplied)
for wiring. Using other cables with different wiring
positions might result in disturbed images and
sound.
L
R
G
V
L: Left audio (White)
R: Right audio (Red)
V: Video (Yellow)
G: Ground (earth)
Notes
• Only connect to the A/V IN terminal of this unit. Do not
connect to other terminals, such as MIC IN or REMOTE IN.
• Refer to the instructions supplied with your A/V devices for
details about connecting and using the A/V device.
L
V
G
R
15
GB
Publicidad
