Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
- EN -
Scope of delivery
Pos.
A
AirFlo 230 V, 1.5 kW
AirFlo 400 V, 1.5 kW
1
1 x
2
1 x
3
1 x
4
–
1 x
5
1 x
6
1 x
7
1 x
1 x
8
–
9
1 x
10
1 x
11
1 x
Product Description
AirFlo 230 V, 1.5 kW / 400 V, 1.5 kW / 400 V, 4.0 kW is an aerator for supplying oxygen to ponds and lakes, and a
floating water fountain, which can create different spray patterns.
Intended use
Air Flo, referred to as "unit", may only be used as specified in the following:
• For aeration and supplying oxygen to garden ponds.
• For creating a water fountain.
• Operation under observance of the permissible water quality. (→ Water quality)
• Operation under observance of the technical data.
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• Never use the unit to convey fluids other than water.
• Never run the unit without water.
Installation
The respective nozzle is fitted to achieve the desired spray pattern. The unit can make three different spray patterns.
(→ Overview of spray patterns)
Overview of spray patterns
The following nozzle/disc combinations are possible. Any other combinations other than those shown here are not per-
mitted:
Spray pattern effect
AirFlo 230 V, 1.5 kW
AirFlo 400 V, 1.5 kW
AirFlo 400 V, 4.0 kW
All dimensions are approximate reference values
18
B
AirFlo 400 V, 4.0 kW
I
Nozzle 138
a [m]
2.5
b [m]
0.6
Nozzle 138
a [m]
3.5
b [m]
0.8
Nozzle 150
a [m]
6.0
b [m]
1.5
Description
1 x
Float
1 x
Accessory kit containing fastening material
1 x
Screw M12 × 16 mm
1 x
Disc 90
–
Disc 110
1 x
Protection grid
1 x
O ring
–
Nozzle 120
1 x
Nozzle 138
1 x
Nozzle 150
1 x
Operating instructions
1 x
Propeller unit
1 x
Riser pipe
Nozzle 120
Nozzle 120
Nozzle 138
II
Nozzle 138 and disc 110
4
0.95
Nozzle 138 and disc 110
5.0
1.0
Nozzle 150 and disc 90
8.0
2.0
III
6
1.8
6.0
2.0
10
3.0
Publicidad
Tabla de contenido
