Coaguchek Vantus System Manual De Usuario página 44

44
The test strip symbol prompts you to insert a
test strip.
7 Remove a test strip from its container.
Immediately after removing a test strip,
close the container again with the stopper.
NOTICE
Exposure to external influences (e.g. humidity)
may deteriorate the test strips and may lead
to error messages.
8 Hold the test strip so that the lettering, the
arrows and the blood drop symbols are
facing upward.
9 Slide the test strip into the test strip guide
in the direction indicated by the arrows.
Slide the test strip in as far as it will go.
A beep tone indicates that the test strip
has been detected (unless you have
disabled the beeper function).
CoaguChek Vantus System User's Manual, version 2.0