Button Click - Coaguchek Vantus System Manual De Usuario

Button Click

Settings
Result Format
Set Targets
Beeper Volume
Display Brightness
Button Click
Data Transfer
CoaguChek Vantus System User's Manual, version 2.0
Text
Button Click
On
Off
Save
The meter can be set to emit a click sound
whenever you press a button.
To set the button click:
1 Select Button Click
button to open the corresponding
menu.
The current status is indicated by a green dot
on the right.
2 Use the up/down arrows button
select On or Off.
3 Press the Enter button
selection, which is now indicated by the
green dot.
4 Press the Enter button
selected status.
The setting of the beeper volume also applies
to the button click. If the beeper volume is set
to Off, the button click will also be muted.
and press the Enter
to
to confirm the
again to save the
97