Coaguchek Vantus System Manual De Usuario página 66

66
Text
Transfer Data
Transferring data...
Data...
To connect the meter to a computer, you will
need a suitable USB cable (included in the
kit). Connect the micro USB type B plug to
the meter (the USB port is located on the
right-hand side of the meter) and the USB
type A plug to the computer. In order to
transfer data, always connect the cable to the
meter first and then to the computer.
Data transfer must be actively triggered
by the computer application or device app
used for reading the stored data.
When the connection has been established
and the download command has been
Data Transfer
received, the meter informs you about the
progress.
Data Transfer
Complete
To save battery power, remove the USB
cable after transferring the test results to
the PC.
CoaguChek Vantus System User's Manual, version 2.0