Beeper Volume - Coaguchek Vantus System Manual De Usuario

Beeper Volume

Settings
Time & Date
Result Format
Set Targets
Beeper Volume
Display Brightness
Button Click
CoaguChek Vantus System User's Manual, version 2.0
Beeper Volume
High
Medium
Low
Off
Save
If the beeper is activated, the meter always
beeps when an action is taken, for example a
test strip is inserted or a sufficient sample has
been applied.
The beeper volume can be set or deactivated.
However, in case of an error the meter will
always beep for safety reasons, even if you
have set the beeper function to Off. To set the
beeper volume:
1 Select Beeper Volume
Enter button to open the corresponding
menu.
The currently set volume is indicated by a
green dot on the right.
2 Use the up/down arrows button
select the desired volume.
3 Press the Enter button
selection, which is now indicated by the
green dot.
4 Press the Enter button
selected volume.
and press the
to
to confirm the
again to save the
95