Publicidad
Installation Instructions:
Instrucciones De Instalación:
Recommended fitting type for
back-to-back installations.
Tipo de conexión recomendada para
las instalaciones en oposición
Apply weight
evenly. Do not
move after
placement.
Water tight seal
may break.
Distribuya el peso
uniformemente. No
lo mueva una vez
colocado. El sello
apretado del agua
puede romperse.
4
pg
BACK-TO-BACK INSTALLATION
INSTALACIÓN EN OPOSICIÓN
Depending upon your plumbing and venting conditions, the flow from this toilet in a back-to-back
installation may create a vacuum on the system and draw water from the opposing bowl. The
National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over
is possible. The code does approve a directional "Y" style fitting with proper venting to direct the
water downward and away from the other toilet.
Depending upon your plumbing and venting conditions, the flow from this toilet in a back-to-back
installation may create a vacuum on the system and draw water from the opposing bowl. The
National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over
is possible. The code does approve a directional "Y" style fitting with proper venting to direct the
water downward and away from the other toilet.
1
3
Hand tighten
!
only. Do not
overtighten.
Apriete a mano
!
solamente. No
apriete de más.
A
2
Press firmly to install wax
ring with plastic collar facing
away from toilet.
Para instalar el anillo de cera,
presione rmemente contra la
cerámica asegurando que el
aro de plástico quede en
dirección contraria al inodoro
(hacia el desagüe).
4 4
B
Publicidad
