Frozen Foods
Use the Frozen Foods feature to prepare frozen
convenience foods, like chicken nuggets, french fries,
fish sticks, using bottom heat and Convection.
Place the food you want to cook directly on the metal tray
turntable.
You can set a temperature range from 200 to 450° F
(100 to 230°C).
Setting Frozen Foods
The appliance must be turned off.
Touch Frozen Foods.
1.
The symbol for bottom heat and Convection
up. The default temperature 425° and start/enter are
blinking and the display shows BAKE ON METAL
TRAY.
You can change the temperature by using the number
2.
keys. You can enter a temperature between 200 and
450° F (100 - 230°C).
Touch Start/Enter.
3.
The appliance starts preheating. The set temperature,
the preheat bar and the oven mode FROZEN FOODS
are displayed. The time of day will be permanently
displayed.
The set temperature is reached once the preheat bar has
filled up completely and a beep sounds. Place food in
the preheated oven on the metal tray in a single layer.
To change the temperature during operation, touch
Frozen Food. Type in the new temperature using the
number keys and confirm with Start/Enter.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. When you close the
appliance door, operation will be resumed.
Cancel operation
Touch Clear/Off to cancel the active oven mode. The
appliance turns off and the clock is displayed.
The cooling fans may continue to run for awhile and then
switch off automatically.
Pizza
You can use the Pizza mode to bake three different types
of pizza:
Mode no.
Pizza type
Frozen pizza
1
Fresh pizza
2
Microwave pizza
3
lights
Bake on
Metal tray
Metal tray
Ceramic tray
Pizza tips
Check pizza before minimum time, pizza may cook
faster compared to a traditional oven.
For fresh pizza use a pizza paddle for sliding the pizza
on and from the metal turntable.
If using a pizza paddle, sprinkle the paddle liberally
with cornmeal for ease in transferring the dough to the
metal turntable.
Maximum size is 12 inches for fresh and frozen pizzas.
Avoid using a pizza stone as it can damage the oven.
The metal turntable can be used for cutting pizza into
slices. Remove the turntable from the oven after the
pizza is baked.
Setting Pizza mode for fresh or frozen pizza
The appliance must be turned off.
You can set a temperature range from 375 to 450° F
(190 to 230°C) for fresh and frozen pizza modes.
You can bake fresh or frozen pizza directly on the metal
tray turntable.
Touch Pizza.
1.
The display shows SELECT TYPE
Touch Pizza or +Amount repeatedly to scroll through
2.
all pizza modes.
Touch Start/Enter. For frozen or fresh pizza the
3.
display reads BAKE ON METAL TRAY. The default
temperature and
light up on the display.
You can change the temperature by using the number
4.
keys. Touch Start/Enter to confirm.
The appliance starts preheating.
The set temperature is reached once the preheat bar has
filled up completely and a beep sounds.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. When you close the
appliance door, operation will be resumed.
Setting Pizza mode for microwave pizza
Place the microwave pizza on the ceramic tray and put it
in the oven following package directions.
Touch Pizza.
1.
The display shows SELECT TYPE
Touch the number key 3 or touch Pizza or +Amount
2.
repeatedly until MICROWAVE PIZZA is displayed.
Touch Start/Enter. For microwave pizza the display
3.
reads USE CERAMIC TRAY. start/enter is blinking.
Touch Start/Enter again. sensing and the microwave
4.
symbol
light up on the display.
The appliance starts sensing.
When sensing is complete, a beep will sound and the
calculated cook time will start to count down.
After the cook time has run out a beep will sound. The
appliance turns off and the clock is displayed.
Note: Do not open the door during the sensing
process, or the program will be cancelled.
-
.
-
.
19