Descargar Imprimir esta página

Taurus ROBOT 500 INOX Manual página 17

Ocultar thumbs Ver también para ROBOT 500 INOX:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Accessories:
Blender foot accessory (Fig. 2):
- This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food ...
- Attach the stick to motor body and turn in the
direction of the arrow (Fig. 2).
- Put the food to be prepared in the jar and switch
the appliance on.
- For further cleaning, detach and remove the
stick by turning in the opposite direction of the
arrow (Fig. 2).
Chopping accessory (Fig. 3):
- This accessory is used to chop vegetables or
meat...
- Put the food to be prepared in the chopping
container with the blades inside and attach the
cover firmly.
- Fit the adapter fitting to the motor unit by turning
it in the direction of the arrow.
- Attach the unit to the cover and switch the
appliance on (Be careful: do not switch the
appliance on if the whole unit is not properly fitted
and connected together).
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid, and release the
adapter fitting.
Whisk accessory (Fig. 4):
- This accessory is used to whip cream, beat egg
whites...
- Insert the whisk into the motor unit (Fig. 4.1). Fit
the adapter fitting to the motor unit by turning it in
the direction of the arrow (Fig. 4.1).
- Put the food into a large receptacle and switch
the appliance on (Fig. 4.2). For best results, turn
the whisk clockwise.
- Remove the whisk accessory and release the
adapter fitting (Fig. 4.3)
- Note 2: To free the whisk (F) from the adapter
fitting (G), pull the ring on the whisk.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and inexo-
rably affect the duration of the appliance's useful
life and could become unsafe to use.
- The appliance is suitable for cleaning in hot
soapy water or in a dishwasher (using a soft
cleaning program).
- The following pieces may be washed in a dis-
hwasher (using a soft cleaning program):
- Blender foot
- Measuring cup
- Goblet
- Whisk
- The draining/drying position of the articles was-
hable in the dishwasher or in the sink must allow
the water to drain away easily (Fig 5).
- Then dry all parts before its assembly and storage.
Anomalies and repair
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
For EU product versions and/or in case that it is
requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its
working life has ended; take it to an
authorised waste agent for the selective
collection of Waste from Electric and
Electronic Equipment (WEEE).
This appliance complies with Directive 2014/35/
EC on Low Voltage, Directive 2014/30/EC on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.

Publicidad

loading

Este manual también es adecuado para:

Robot 500Robot 500 plus inoxRobot unic 500 plus inox