Publicidad
Idiomas disponibles
Idiomas disponibles
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations. Follow all special requirements
on packaging and labelling when transporting batteries by
a third party.
Ensure that no batteries can come in contact with other
batteries or conductive materials while in transport by
protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries that are
cracked or leaking. Check with the forwarding company for
further advice.
MAINTENANCE
WARNING
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. Have the product serviced by an authorised
service centre only. When servicing, use only original
replacement parts.
■
Turn off and remove the battery pack before conducting
any maintenance or cleaning work.
■
You may make adjustments and repairs described in
this manual. For other repairs, contact the authorised
service agent.
■
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
■
Bring the product to an authorised service centre to
replace damaged or unreadable labels.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■
injury caused by vibration
–
Hold the product by designated handles and restrict
working time and exposure.
■
injury caused by exposure to noise
–
Wear hearing protection and limit exposure.
■
injury caused by flying debris.
–
Wear eye protection at all times.
4
| English
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■
Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 138.
Parts
1. Lock-out trigger
2. Trigger
3. Wire brush
4. Wheel
5. Roller brush assembly
6. Roller brush
7. Charger
8. Battery latch
9. Battery
10. Attachment change button
11. Telescoping latch
12. Knob
13. Handle
SYMBOLS ON THE PRODUCT
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye protection
Wear ear protection
Wear protective gloves
Publicidad
