LG DLGY1702 E Serie Manual Del Propietário página 40

40 OPERATION
NOTE
To protect your garments not every dryness level,
temperature, or option is available with every
cycle. See the Cycle guide for details.
NOTE
The Energy Saver option is turned on by default
in the Normal cycle.
For faster drying in the Normal cycle, turn off the
Energy Saver option.
Protocol P154
CERTIFIED BY NSF/P154
Sanitization Performance of
Residential Clothes dryer
NSF International (formerly the National Sanitation
Foundation), certifies that the ANTI-BACTERIAL cycle
reduces 99.9% of bacteria on laundry, and none of
the bacteria will carry over onto the next laundry load.
• The default settings for the ANTI-BACTERIAL
cycle are HIGH temperature and VERY DRY. These
default settings cannot be changed.
• Do NOT use this cycle with delicate items or
fabrics.
SENSOR DRY Cycles
SENSOR DRY cycles utilize LG's unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
mANUAL DRY Cycles
Use MANUAL DRY cycles to select a specific amount
of drying time and a drying temperature. When a
MANUAL DRY cycle is selected, the Estimated Time
Remaining display shows the actual time remaining
in your cycle. You can change the actual time in
the cycle by pressing the more Time or Less Time
buttons.
Cycle Settings and Options
Cycle Modifier Buttons
SENSOR DRY cycles have preset settings that
are selected automatically. MANUAL DRY cycles
have default settings, but you may also customize
the settings using the cycle modifier buttons. Press
the button for that option to view and select other
settings.
Dry Level
Selects the level of dryness for the cycle. Press
the Dry Level button repeatedly to scroll through
available settings.
• This option is only available with SENSOR DRY
cycles.
• The dryer will automatically adjust the cycle time.
Selecting More Dry or Very Dry will increase
the cycle time, while Less Dry or Damp Dry will
decrease the cycle time.
• Use a Less Dry or Damp Dry setting for items that
you wish to iron.
Temp. Control
Adjusts the temperature setting. This allows precise
care of your fabrics and garments. Press the Temp.
Control button repeatedly to scroll through available
settings.
Time Dry
Allows you to manually select the drying time, from 20
to 60 minutes, in 10-minute increments. Use this for
small loads or to remove wrinkles.
more Time/Less Time
Use the more Time/Less Time buttons to add or
reduce the drying time of a MANUAL DRY cycle in
1-minute increments.
Signal (Option)
Press the Signal (Option) button repeatedly to
change the volume or turn on/off the button tones and
the end of cycle melody.