LG DLGY1702 E Serie Manual Del Propietário página 42

42 OPERATION
Rack Dry
Use Rack Dry with items, such as wool sweaters, silk,
and lingerie, that should dry flat. Rack Dry can also
be used with items that should not be tumbled dry,
such as gym shoes or stuffed animals.
Using the Rack Dry cycle:
1
Press and hold the button marked with Rack
Dry for 3 seconds until you hear a beep and the
cycle time appears on the display.
2
Press the Temp. Control button to select
temperature options. If no temperature is
selected, the cycle defaults to no heat.
NOTE
NEVER tumble dry a load of clothing with the
rack installed. When the rack is installed, the
drum will rotate as usual, but the rack will not
move. Make sure all articles to be dried remain
completely on the rack and cannot fall off or be
pulled off by the turning drum. Be sure to remove
the rack after use.
Installing the drying rack:
1
With the dryer door open, slide the rack into the
dryer drum.
2
Make sure it is seated evenly on the edge of the
inner door rim and resting flat on the inside of
the dryer.
Custom Pgm
If you have a special combination of settings that
you use frequently, you can save these settings as a
custom program.
Saving a Custom Program:
1
Turn on the dryer and press the CYCLE buttons
to select the desired cycle.
2
Use the cycle setting buttons to adjust the
settings for that cycle.
3
Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4
Press and hold the Custom Pgm button for 3
seconds.
NOTE
You may save only one custom program at a
time. Pressing and holding the Custom Pgm
button will overwrite any previously saved custom
program.
Recalling a Custom Program:
1
Turn on the dryer.
2
Press the Custom Pgm button.
3
Press the START/PAUSE button to start the
cycle.