Assemble Hood
see images
-
8
9
Snap the 4 hook and loop fasteners on canopy rear retention.
Assemble Armbar
see images
-
10
11
Assemble Storage Basket
see images
12
Stroller Operation
Adjust Recline
see images
-
14
15
Use Buckle
see images
-
16
17
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on a child's neck.
Use Shoulder & Waist Harnesses
see images
-
18
21
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
18
- 1
Shoulder harness anchor A
18
- 2
Shoulder harness anchor B
18
- 3
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots.
For smaller child, use shoulder harness anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.
Thread it through the shoulder harness slot from back to front.
to child's shoulder height.
20
Use slide adjuster to change the harness length.
21
- 2
Press the button
, while pulling the waist harness to proper length
21
Adjust Calf Support
see images
-
22
23
The calf support has 2 positions.
To raise the calf support, push it upwards.
13
9
Rethread it through the slot that is closest
19
-1
- 3
21
To lower calf support, press the adjustment buttons on both sides of the calf support
support downwards.
- 2
23
Use Front Swivel Lock
see images
24
Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel locks on uneven surfaces.
Use Brake
see images
-
25
26
To lock wheels, step the brake lever downwards.
25
To release wheels, step the brake lever forwards.
Tip
Always set the parking brake when stroller is not moving.
Use Hood
see images
-
27
28
Roll up the hood's rear panel and then attach the hook and loop fastener, to check on your baby.
Fold Stroller
see images
-
29
30
!
Please fold the hood before folding the stroller.
-1
Push secondary lock
and squeeze one-hand-fold handle
29
stroller, then the stroller can stand when folded.
30
Use Accessories
Accessories may be sold separately or may not be available depending on region.
Use Rain Cover
see images
32
To assemble the rain cover, place it over the stroller, and then attach the 8 pairs of hook and loop fasteners on
the rain cover.
32
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
Use Reversible Seat Pad
see images
-
33
34
-
1, and rotate the calf
23
24
26
28
-2
. Pull the armrest rearwards to fold
29
14