Instruction manual
PartS liSt
1. Temperature switch
2. Freezer compartment
3. Adjustable foot
1
2
3
Before the firSt uSe
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting
the device. Voltage 220V-240V 50/60Hz)
4
firSt uSe
• Place the appliance on a flat stable surface in a well ventilated area and
keep at least 10 cm. free space around it.
• Make sure the unit is placed right. With the adjustable foot (No. 3) the
device can be leveled.
• After transport, wait at least 4 hours before plugging into the wall
outlet. Avoid that appliance is getting wet.
• Make sure the power cable to the power plug is not curled up on the
back of the device, it can be too hot. Place the plug always a grounded
outlet.
• The refrigerator should be far away from any heat source or direct
sunshine.
Door reverSal inStructionS
• Your refrigerator is built with a reversible door. You have the choice of
either opening it from the left or the right side. In order to reverse the
opening direction of your door, please follow these simple instructions.
• Changing the door hinge must be carried out with 2 people.
• Remove the cover, 2 screws and support at the top of the refrigerator.
Lift the door out of the bottom bracket.
• Tilt the machine and remove the bottom bracket. Insert the bottom
support on the other side of the device, place the door in the bottom
bracket, then attach the upper support and cover.