Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Trimmer
head
ON/STOP SWITCH
The ON/STOP switch is used to stop engine. To
stop the engine, push and release the engine
ON/STOP switch.
PRIMER BULB
The PRIMER BULB removes air from the car-
buretor and fuel lines and fills them with fuel.
This allows you to start the engine with fewer
pulls on the starter rope. Activate the primer
bulb by pressing it and allowing it to return to
its original form.
(TRIMMER ATTACHMENT)
Assist handle
Coupler
Shaft
Start lever
Shield
ON/STOP
switch
Throttle trigger
Spark plug
Primer bulb
START LEVER
The START LEVER helps to supply fuel to the
engine to aid in starting. Activate the starting
system by moving the start lever to the START
position.
COUPLER
The COUPLER enables optional attach-
ments to be installed on the unit.
12
Starter handle
Muffler
Publicidad
