Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use the Remote to Control Your TV
¶
MENU button
The MENU button will start the On-Screen Display.
º
EXIT button
This button will exit all On-Screen Displays.
¾
INPUTS button
When the remote control is in TV mode, press this
button to access the INPUTS menu. Use the
CURSOR and SELECT buttons to scroll and select
the inputs that are being used. Pressing the
INPUTS button repeatedly will also cycle through
the Inputs menu items. Then press the SELECT
button to select.
HDMI-Front
Photo Input
Air / Cable
Input 1
Input 2
Move
SEL Select
INPUT 1
Select to choose INPUT 1.
INPUT 2
Select to choose INPUT 2.
INPUT 3
Select to choose INPUT 3.
INPUT- FRONT
Select to choose FRONT INPUT .
HDMI 1
Select to choose HDMI 1 INPUT.
HDMI 2
Select to choose HDMI 2 INPUT.
HDMI- FRONT
Select to choose FRONT HDMI INPUT.
PHOTO INPUT Select to access your pictures from a
digital camera, MMC/SD Flash memory
or memory card connected to the Photo
Input in the front panel of the Plasma
TV (see pages 30-31).
AIR/CABLE
Select between Air or Cable signal.
µ
PICTURE-IN-PICTURE button
See separate section on pages 33-34 for a more
detail description.
¸
CURSOR buttons/SELECT button
All the On-Screen Display features can be set or
adjusted by using the CURSOR buttons and the
SELECT button, except for numeric entries. Press
the CURSOR buttons toward desired direction and
press the SELECT button to select.
CLOSED CAPTIONS (CC) button
¹
Use this button to display the dialogue, narration,
and/or sound effects of a television program or home
video which are displayed on the TV screen when
available. Your local TV program guide denotes
these programs as
or
GUIDE button
Press this button to access the TV Guide On Screen
interactive display (see page 54-56). Press this
button to access the Channel Guide of the (CBL),
and (SAT/STB) while in (CBL)(SAT/STB) mode.
Program Information
Program Run Time
Program Information
Program Run Time
When an S-VIDEO Input is connected
NOTE: 1. Press the INFO button again or the EXIT
.
TM
INFO button
Press this button when you want to check the
channel being received, the picture source, if
the channel has stereo (ST) or second audio
program (SAP), the time, CHANNEL ID and if
the TIMER is set.
ANALOG CHANNELS
Show Name
A
3:00PM- 3:30PM
ST
TV-G
480i
Audio
Broadcast
Picture Format
Broadcast
Rating
Auto
STEREO
Closed
Audio Source
Caption setting
Selection
DIGITAL CHANNELS
Digital Closed Caption
This icon will appear only when
receiving a Digital Broadcast with
Closed Captioning.
Show Name
3:00PM-
3:30M
REGION 5
ST
1080i
DTvCC
TV-G
Alternate
Broadcast
Picture Format
Audio
Broadcast
Rating
Rating
Program Description
(Press INFO again for a more detailed description)
Auto
Closed
Caption setting
to INPUT 1
480i
Auto
When a Component Video: Y-PbPr
Input is connected to INPUT 3
480i
Input Signal
Format
Auto
button to return to normal viewing.
2. The Aspect setting will not be shown if
the channel is locked.
3. Program Information, Program Run Time
and Program Description can be displayed
by Guide Listing data even if receiving
analog channels.
Analog Channel
Main Picture Source
Air
8
and channel indication
Broadcast channel
KXYZ-HD
identification
3:17PM
Clock
Digital channel
Air
15-1
Main Picture Source
D
and channel indication
KPBS-HD
Broadcast channel
3:17PM
identification
Clock
S-IN: 1
3:17PM
Y-PBPR: 3
3:17PM
29
Publicidad
