Descargar Imprimir esta página

Hitachi ULTRAVISION Director's Serie Guia De Funcionamiento página 80

Publicidad

Idiomas disponibles

Idiomas disponibles

Setup
Select The Quick Start Option
This feature will select QUICK START UP options. Set
this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on.
Set this feature to OFF to save electricity. Selecting ON
for the QUICK START UP feature will activate the TV
tuners circuits when the TV is in "standby mode" which
is commonly referred to as "off". This will allow you to
quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will monitor
any changes and prepare the television to quickly
present a picture. A small amount of electricity is used
to continually monitor signals when this feature is
selected.
Reset The Software
This feature shows software information and easy
upgrade procedure. This function allows the TV software
to be upgraded by using a flash card (MMC/SD CARD).
If a future software upgrade is required for your TV,
HITACHI will notify and provide you with a flash
card. In order to receive written notification and the
flash card, please complete and return the warranty
card.
1. Insert MMC/SD CARD.
2. Press the CURSOR PAD
UPGRADE NOW.
3. Press the SELECT button to select and start
upgrading.
4.
Unplug the AC power cord or press the
POWER button for 5 seconds (P60X901
only) when the UPGRADE is complete.
(Only P50X901 model: MAIN POWER button
OFF/ON operation can also complete
UPGRADE).
NOTE: Any power interruption during the upgrade
process will cancel the upgrade. When this
happens, repeat the upgrade procedure.
Reset TV Settings
This function allows you to Reset all TV Settings to the original factory settings on all modes during the next
main power off/on.
1. Use CURSOR PAD
,
2. Press the SELECT button or CURSOR PAD
3. Use the CURSOR PAD
4. Select the "YES" option to Reset ALL the TV functions and unplug the AC cord or press the POWER button for
5 seconds.
NOTE: 1. If YES is selected, ALL TV MENU SETTINGS will be reset to the original factory settings on all modes
when the AC cord is unplugged once or the POWER button is pressed for 5 seconds (P60X901 only).
2. When the Quick Start Option has been set to ON or TV Guide On Screen
Reset TV Settings will not operate unless the AC cord is unplugged once or the POWER button is pressed
for 5 seconds (P60X901 only).
3. (Only P50X901 model) MAIN POWER button OFF/ON operation can also enable this function.
80
or
to highlight
to highlight functions.
to select Reset the Software Menu.
to access the Reset TV settings option.
Setup
Setup The Menu Options
Set The Screen Saver
OR
Set The Inputs
Set The AV Net
Set The Closed Captions
Set The IR Out
CableCARD Information
Select The Quick Start Option
Reset The Software
Move
Select
SEL
Setup
Select The Quick Start O O ption
Select ON to have the TV tune channels quickly at
OR
1st turn on.
Select OFF to save electricity
Off
On
Move
Select
SEL
Setup
Setup The Menu Options
Set The Screen Saver
OR
Set The Inputs
Set The AV Net
Set The Closed Captions
Set The IR Out
CableCARD Information
Select The Quick Start Option
Reset The Software
Move
Select
SEL
Setup
Reset The Software
MMC Software Upgrade :
Vxxxx.xxxx
OR
Upgrade Now
Please Insert MMC card
before upgrading.
Reset TV Settings
No
Yes
(Select "Yes" to return all settings
to the factory default after main power OFF/ON.)
Move
SEL
Return
TM
is configured, the option of

Publicidad

loading

Este manual también es adecuado para:

Ultravision director's p60x901Ultravision director's p50x901