Publicidad
Idiomas disponibles
Idiomas disponibles
Switching on the cooktop
5IX92291 is equipped with touch sensitive electronic sensor keys.
Switch on the cooktop firstly, and then the desired cooking zone.
Activating the desired cooking zones
Press the power button
All of the displays will light up. If no other inputs are provided, after a few seconds the cooktop will
automatically shut itself off for safety reasons.
Touch the key button for the desired cooking zone.
The display will show "0"; press + or – to select the desired power setting, ranging from 1 to P it is
possible to activate plate warmer mode indicated by the symbol U by selecting the power level
between 0 and 1
P:
Booster
indicates the
press the + key to get to power setting 9, then press the key once more. This function will remain
active for 5 minutes, after which the system will reset itself to power setting 9. This function is
recommended to bring water to the boil more quickly.
Pot Detection
If no pots or receptacles are placed or recognised on the various cooking zones, the pot detection
function will indicate this condition with the symbol "u".
Set a pot or pan of a suitable diameter and material onto the cooking zones, as described in the
section on suitable cooking containers.
The cooking zone will switch off automatically after 10 minutes if no pot is
Switching off the cooktop and residual heat indication
Touch the power button.
The main indicator light and cooking zone lights will switch off. The cooktop is now powered
off. The residual heat indicator, displayed as a H on each cooking zone, will remain lit until these
zones have not sufficiently cooled down.
Warning: risk of burns
Do not touch a cooking zone for which the indication (H) appears.
FUNZIONAMENTO
OPERATION
for at least 2 seconds.
function, and is present on each of the cooking zones. To activate it,
63
63
GB
I
recognised.S
Publicidad
