Tectro TD 1010 Instrucciones De Uso página 52

Ocultar thumbs Ver también para TD 1010:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
4
52
man_TD1010 ('16).indd 52
B. TO CLEAN THE AIR FILTER
1.
Open the inlet grill firstly and remove the air filter.
2.
Clean the air filter
Run a vacuum cleaner lightly over the surface of the air filter to remove dirt. If the
air filter is exceptionally dirty, wash it with warm water and a mild cleanser and dry
thoroughly.
3.
Attach the air filter
Insert the filter into the grill smoothly, and place the inlet grill into right place.
STORAGE
If the machine will not be used for a long period of time, take the following steps:
1.
Remove the plug from the socket and empty the container. Allow the container and
the dehumidifier to dry completely.
2.
Clean the air filter.
3.
Store the device in a dust-free location, preferably covered with a sheet of plastic.
Fig. 9
Fig. 10
Fig. 11
17-05-16 14:58

Publicidad

Tabla de contenido
loading

Tabla de contenido