Publicidad
Idiomas disponibles
Idiomas disponibles
Fax +32 2 359 95 50
1) Handle
2) Locking knob
3) Burst of steam button
4) Pressing plate
5) Ironing board
6) Control panel
a) Power light (red)
b) Ready light (green)
c) Steam ready light (yellow)
d) ON/OFF switch
e) Temperature selector
7) Water tank
8) Ironing board cover
9) Pressing cushion
10) Spray bottle
11) Water beaker
BEFORE USE
Set the appliance on a sturdy work surface. Unlock the locking knob.
FILLING THE WATER TANK
Use preferably demineralized water. If you want to use the steam
function fill the water tank as follows:
1) Unplug the steam press from the outlet to let it cool down.
2) The pressing plate must be lifted to the raised (up) position.
3) Slide the water tank towards the front of the unit. It will not come
completely out so do not force it to do so. Using the water
beaker, slowly pour the distilled water into the water tank. Never
overfill the water tank. The water level can be seen through the
front of the tank.
4) Be careful to avoid spilling water onto the steam press when
filling.
5) Slide the water tank back in.
6) When pressing, unplug the appliance before refilling.
Copies of the I/B. Please reproduce them without any
changes
except
under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
6
Assembly page 6/28
special
instruction
from
Team
Print only
USK STP 23783 - 110127
Publicidad
