Reolink Argus Eco Manual Del Usuario página 5

• In Different Network (In WAN)
1. Click "Add Device" on the right-side menu.
2. Choose "UID" as the Register Mode.
3. Type in the UID of your camera.
4. Create a name for the camera displayed on Reolink Client.
5. Input the password created on Reolink App to log in.
6. Click "OK" to log in.
7 English
NOTICE: To save power, the
camera will log out if no
operation is conducted for
about five minutes. You must
login again by clicking the
" " button.
Attention for Camera Installation
• PIR Sensor Detecting Distance
The PIR senor has 3 sensitivity levels for your adjustment: Low/Mid/High.
Higher sensitivity offers longer detecting distance. The default sensitivity of the PIR sensor is at
"Mid".
Detecting Distance
Sensitivity Value
(For moving and living things)
Low 0 - 50 Up to 4 meters (13ft)
Mid 51 - 80 Up to 6 meters (20ft)
High 81 - 100 Up to 10 meters (30ft)
NOTICE:
1. Path for adjusting distance in App: Device settings-PIR settings
2. Path for adjusting distance in Client: Device settings-RF Alarm
3. Higher sensitivity offers longer detecting distance, but it would lead to more false alarms. You
are advised to set up the sensitivity level to "Low" or "Mid" when you install the camera outdoors.
Detecting Distance
(For moving vehicles)
Up to 10 meters (33ft)
Up to 12 meters (40ft)
Up to 16 meters (52ft)
English 8