Regular Cleaning And Maintenance - Orbegozo EX 6000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EX 6000
CLEANING
1. Before cleaning or other maintenance, turn off coffee maker, unplug it and let it cool down.
2. Do not use solvents or detergents when you clean coffee makers. Just damp cloth.
3. Remove drip tray and clean it regularly.
4. Clean water tank regularly to avoid rare tastes in coffee.
5. After brew a coffee, remove filter-holder, remove coffee poder, clean remains of coffee of filter and filter-
holder to avoid obstruction.
6. Clean moving parts with water and dry them thoroughly.
Tips for making coffee
- Ground of coffee: if the coffee powder is pulpy, it indicates that the coffee powder is too fine; if it's in the
shape of losse sand, it indicates that the coffee powder is too coarse; if the coffee ground is in cake
shape, it indicates that coffee powder is suitable.
- Quantity of coffee powder: for espresso coffee we recommend to use 7-10g. for double use about 16g.
- Pressing of coffee: you should press coffee powder with a strength of 3.6 kg, using a hand is enough.
- Hook of filter-holder: it uses for holding filter when you pour out coffee powder and avoid it falls down.
- Top tray cup warmer. It is recommended that cup is warm when you make coffee, so it will have better
taste, avoiding it gets cold because temperature difference.
- We recommend you using cold milk because it froths the quickest.

REGULAR CLEANING AND MAINTENANCE

1. To ensure coffee maker brews good taste coffee, you should decalcify once every three months (regular
using).
2. You can use "descaler for coffee maker" to decalcify ducts of coffee maker. Mix 4 parts of water with 1
part of descaler. If you don't have descaler you can use citric acid or vinegar, the rate would be 100 parts
of water with 3 parts of citric acid.
3. It's not necessary to put coffee powder in filter when you clean ducts.
4. For cleaning water outlet and steam tuve follow steps to make cappuccino.
5. After, repeat cappuccino process 3 times with water to avoid remains of cleaner in ducts.
6. Each time you want to repeat cleaning process you should wait until coffee maker cold down for 3
minutes.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido