Tristar SZ-2190 Manual De Usuario página 8

instruction manual
PArtS DEScriPtioN
1. Large floor brush 7. Wheel
2. Small floor bush 8. On/off switch + power regulation
3. Crevice nozzle 9. Handle
4. Telescopic tube 10. Cord rewind button
5. Hose 11. Release button
6. Dust compartment
8
5
9
10
1
8
vacuum cleaner
11
6
7
2 3
BEForE FirSt uSE
• Place the hose with the side of the coupling in the upper side of
the vacuum cleaner, if you hear a click, the tube is secured.
• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Place the other side of the hose into the telescopic tube.
• To disconnect the hose, press the button on the hose coupling.
• Only use the device if all the filters included the dust compartment
are placed properly, a damaged or improperly installed filter or
dust compartment may damage the unit.
uSE
• Use the on/off button to activate your device.
• Slide the telescopic tube to the desired length.
• Unwind a sufficient length of cable and insert the plug into the power socket.
The yellow mark on the power cable shows the ideal cable length.
Do not expend the cable beyond the red mark.
• Use the button on the floor brush and choose the desired position,
with or without brush at the bottom of the floor brush.
• Control with the power regulation button the desired suction power.
cLEANiNG AND mAiNtENANcE
Emptying the dust compartment
• Push the release button for the dust compartment and lift with your other
hand the dust compartment out of the base.
• Push the release button for the lid to open the dust compartment, now you
can empty the dust compartment.
cleaning the hEPA filter and the in / out coming air filter.
4
• Push the release button for the dust compartment and lift with your other
hand the dust compartment out of the base.
• Push the release button for the lid to open the dust compartment,
now you can empty the dust compartment.