Audio Pro LIVING LV33 Manual Del Propietário página 5

OVERVIEW continued
tXD200 tRANSMIttER
1. House Code selector.
Choose channel for transmitter.
2. LED. Blue for connection. Red for no connection.
Green for paired connection.
3. Pairing button. Press on transmitter and speakers
to pair.
4. USB in. to connect to computer.
Or to connect power supply when using audio
source connected to line in.
5. Line in. Combined optical and analog. Use to
connect transmitter to other audio device than
computer
Beneath the grille on lv33 top is led status indicator, buttons for
volume, button for House code selection, button for Zone selection.
1. volume, + to increase, – to decrease.
each speaker can be set separately to adjust balance.
2. House code (channel), one push displays chosen channel (1, 2, 3).
further pushes changes channel 1>2>3 and back to 1.
3. Zone, one push displays chosen volume zone (a, B, c).
further pushes changes channel a>B>c and back to a.
LED, steady blue for established wireless connection.
flashing blue if wireless connection is lost.
Red for no wireless connection or no transmission.
Green for paired connection.
Volume control
House Code and Zone/Pair buttons
Display
IR receiver for remote
- to use remote, aim at ir-eye.
(Only speaker set to RIGHT or MONO Master can
be used via remote.)
- the displays shows: volume level, chosen channel
(House code), chosen zone, and mute (–).
note: display shows information for 3 seconds
after adjustment
5