Basic Configuration - Audio Pro LIVING LV33 Manual Del Propietário

Basic cOnfiguratiOn

MAC/PC
Before connecting to computer, see Mac or PC setup.
1. connect the tXd200 transmitter to the computer.
2. connect both lv33 speakers to 230v outlet.
done! play your music on your computer.
wireless status:
led lights up blue on speakers and transmitters when wireless connection is established.
led lights up red on speakers and transmitters when no wireless connection is established.
led lights up green on speakers and transmitters when paired wireless connection is established.
note:
- make sure that both speakers and transmitter are using same House code (channel 1, 2 or 3).
- if speakers are in automatic standby mode, led is red even though wireless connection is
established. turns blue when speakers receives audio signal.
MAC SEtUP
1. connect tXd200 transmitter to a free usB socket.
2. go to system preferences, choose sound under Hardware.
3. click Output in menu, choose "usB Headset".
done! you can now send audio from your computer.
PC SEtUP
Please do following setup before using music playing software (for example iTunes or Spotify).
1. connect tXd200 transmitter to a free usB socket. wait until software has been installed.
(see lower right hand corner, message window will open when sound device is ready to use.)
done! you can now send audio from your computer.
For some PC computers ( i e Windows 7) you may need to perform these settings:
2. click start button, go to control panel and choose sound & sound devices.
3. under playback of audio, default unit, choose "usB Headset".
done! you can now send audio from your computer.
6