LG SDWB24 Serie Manual Del Propietário página 31

en-us_main.book.book Page 31 Wednesday, January 25, 2023 8:53 AM
• To avoid damaging the dispenser and blower
cover, do not use them to pull up and close the
dishwasher door.
For more details, refer to the online owner's
manual.
Adding Rinse Aid to the Dispenser
The Rinse Aid Refill LED appears in the display
when more rinse aid is needed.
The use of rinse aid is recommended to prevent
water spots on dishes and to enhance drying
performance.
For more details, refer to the online owner's
manual.
Rinse Aid Dispenser Adjustment
The dispenser has five adjustment levels. The
dishwasher is programmed at the factory for a
rinse aid dispenser level of 2. This can be checked
and adjusted from the control panel.
NOTE
• Adjust the setting higher if you have hard water
and notice calcium buildup on your dishes.
• Setting the rinse aid control too low will
contribute to spotting and streaking on dishes
and poor drying performance.
• Setting the control too high can cause foaming,
which will cause poor wash performance.
1
Ensure the appliance is off.
2
Press Power and Remote Start
simultaneously to enter the Option Setting
Mode.
3
Press Dry Boost to change the rinse aid
dispenser setting. Each press of the button
changes the setting one step from L0 to L4.
4
Once the desired rinse aid dispenser setting is
selected, press Start to save.
Refilling the Rinse Aid
How often the dispenser needs to be refilled
depends on how often dishes are washed and the
rinse aid setting used.
• The Rinse Aid Refill LED flashes when more
rinse aid is needed, unless the rinse aid
dispenser setting is set to L0.
OPERATION 31