Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 1. Installing / Instalación / Installation: POWERVENT (PV)
• Models PV-100 trough to PV-315X / Modelos PV-100 a PV-315X / Modèles PV-100 à PV-315X.
1. Secure mounting bracket to a fixed structure.
Fijar el soporte a la pared o techo.
Fixer le support au mur ou au plafond.
2. Hole the fan up to the mounting bracket fixing holes and place, align and secure fixing bolts.
Sujetar el ventilador y hacer coincidir los agujeros ranurados en en el soporte con los del
ventilador. Atornillar y montar el ventilador.
Placer le ventilateur en faisant coïncider les orifices du support avec ceux du ventilateur,
puis placer les deux vis de fixation.
3. Completely tighten both screws to secure the fan.
Colocar el otro tornillo y apretar ambos.
Bien serrer les deux vis de fixation.
4. Wire the fan in accordance with the Wiring Diagrams in Figure (2).
El ventilador debe tener la conexión electrica como en la Figura (2).
Raccorder le ventilateur selon le schéma de câblage, Figure (2).
To ensure quiet operation of ENERGY STAR qualified inline and remote fans, each
fan shall be installed using sound attenuation techniques appropriate for the insta-
llation. For bathroom and general ventilation applications, at least 8 feet of insulated
flexible duct shall be installed between the exhaust or supply grille(s) and the fan.
For remote ventilation applications, where metal duct is generally required by code, a
metal sound attenuator shall be installed between the hood and the fan.
2
Notes:
- Seal joints with
tape
- Use round
elbows
Publicidad
